deutsch | english

Ground based logging Cable based logging Felling & Processing Reduce to pieces Equipment & Sundry Search Impressum

Category Felling & Processing / Chainsaws

Back | Selection list

HUSQVARNA 550 XP Mark II

General information

Technical data

Producer / distributor

Economy / calculation

Chainsaws for motor manual harvesting and tree care

Power kW:	3
CC:	50.1
Cutting lengths:	33-50 cm

Type in your own numbers here and press

Annual workload

Annual workload
Number of operating hours in which a machine is used per year.
The annual workload cannot be higher than the maximum annual workload. If a bigger value is beeing put in, the maximum annual workload will be used by the program.

hrs.

	BFW	KWF	FAO
Costs per hour Costs per hour In this calculation only direct costs for a machine/equipment are retrieved. This does not include labour costs for operation or transfer of machinery nor costs for administration, buildings etc. of an enterprise.
Depreciation *Cost of depreciation per operating hour = Pr / (Nr JA)** Pr...Price of machinery/equipment Nr...Reduced time of economic use in years JA...Annual workload in operating hours
Interest Interest Interest is calculated for one half of the price of the machinery for a reduced time of economic use. This ensures an interest which is the same for all years of use. *Expense of interest per operating hour = (Pr / 2) (p / 100) * (Nr / Hr)** Pr...Price p....Interest rate in percent Nr...Reduced time of use in years Hr...Reduced operating hours of use
Repair cost Cost of repair The calculation is done using a coefficient deduced from empiric values. This coefficient is the relation between cost of repair and the price of the new equipment/machinery for maximum operating hours of economic use. For a lower annual workload the cost of repair is reduced by a factor consisting of reduced hours of use divided by maximum hours of use. This takes the fact of a lower total amount of operating hours and therefore lower repair costs into consideration. *Cost of repair per operating hour = (Pr / H) (Hr / H) * r** Pr...Price of equipment/machinery H....Maximum hours of economic use Hr...Reduced duration of use in operating hours r....Cost of repair price coefficient
Fuel and lubrification
Depreciation chain
Depreciation swivel blade

Suggested price

Suggested price
Suggested prices are equivalent to depreciation sums. Put in this price including expenses for parts like tires, cables or tools. For example for chainsaws prices are to be put in inclusive expenses for swivel blade and sawing chain.
For calculation the expenses for these parts are subtracted from the depreciation sum and calculated seperately. Reason for this are differences in the maximum number of hours of economic use.
In case of sled winches suggested price is given without cables, as cable equipment can vary very much in quantity and material. In this case you should put in your own price without cables.

€

Max. operating hours of economic use

Max. operating hours of economic use
Total number of operating hours for a device at maximum annual workload and economic use.

hrs.

Max. years of economic use

Maximum economic useful life
Useful life in years, in which the machine can be operated with economic success.
The Maximum economic useful life is a hypothetical value which is only valid for an annual workload of null hours. Using an elliptic equation a reduced useful life ist derivated and used for further calculation.

years

Maximum annual workload

Maximum annual workload
Highest possible number of operating hours which one can use a machinery/equipment, independent from the situation of the own enterprise.
If this value is higher than the maximum operating hours of economic use then the maximum annual workload is set to the value for maximum operating hours of economic use, because our calculating routine cannot deal with a useful life lower than one year.

hrs.

Interest rate

Interest rate
Annual interest for the investition expressed in percent.

Cost of repair as a prize coefficient

Cost of repair as a price coefficient
The calculation is done using a coefficient deduced from empiric values. This coefficient is the relation between cost of repair and the price of the new equipment/machinery for maximum operating hours of economic use. For a lower annual workload the cost of repair is reduced by a factor consisting of reduced hours of use divided by maximum hours of use. This takes the fact of a lower total amount of operating hours and therefore lower repair costs into consideration.

Required garage space

Required garage space
Required space of machine/equipment in cubic meters.
If null, this number will be calculated if any values for length, width and height are found in the database.

m³

Cost of building per cubic meter/yr.

Cost of Building
Cost of Building per cubic meter and year in €.

€/m³

Fuel consumption

l/h

Fuel price

€/l incl. VAT

Cost of lubrification as pct. of fuel price

Percentage of lubrification
Percentage of fuel cost per operating hour used for calculation of lubrification cost per operating hour.

Suggested price

€

Max. operating hours of economic use

hrs.

Suggested price

€

Max. operating hours of economic use

hrs.

Further information

Search
Contact
About FMDB
Impressum

Most requested

Partners