Annual workload Annual workload Number of operating hours in which a machine is used per year.
The annual workload cannot be higher than the maximum annual workload.
If a bigger value is beeing put in, the maximum annual workload will be used by the program.   hrs. 
 BFW  KWF  FAO  Costs per hour Costs per hour
In this calculation only direct costs for a machine/equipment are retrieved.
This does not include labour costs for operation or transfer of machinery nor costs for administration, buildings etc. of an enterprise.
   
Depreciation Cost of depreciation per operating hour = Pr / (Nr * JA)
Pr...Price of machinery/equipment
Nr...Reduced time of economic use in years
JA...Annual workload in operating hours    
Interest Interest
Interest is calculated for one half of the price of the machinery for a reduced time of economic use. This ensures an interest which is the same for all years of use.
Expense of interest per operating hour = (Pr / 2) * (p / 100) * (Nr / Hr)
Pr...Price
p....Interest rate in percent
Nr...Reduced time of use in years
Hr...Reduced operating hours of use    
Repair cost Cost of repair
The calculation is done using a coefficient deduced from empiric values.
This coefficient is the relation between cost of repair and the price of the new equipment/machinery for maximum operating hours of economic use.
For a lower annual workload the cost of repair is reduced by a factor
consisting of reduced hours of use divided by maximum hours of use.
This takes the fact of a lower total amount of operating hours and therefore lower repair costs into consideration.
Cost of repair per operating hour = (Pr / H) * (Hr / H) * r
Pr...Price of equipment/machinery
H....Maximum hours of economic use
Hr...Reduced duration of use in operating hours
r....Cost of repair price coefficient    
Garage cost Cost of garage per operating hour = (V * KS) / JA
V.....Required space in cubic meters
KS...Cost of building per cubic meter and year in ¤
JA...Annual workload in operating hours    
Depreciation of skyline    
Interest skyline    
Depreciation of anchor cables    
Interest anchor cables    
Depreciation of tow rope    
Interest tow rope    
Depreciation of aux. rope    
Interest auxiliar rope    
Depreciation of haulback line    
Interest haulback line    
Fuel and lubrification Cost of fuel per operating hour = l * TP
l......Average fuel consumption in liter per operating hour
TP...Price of fuel per liter excluding VAT
Cost of lubrification is calculated as a percentage of cost of fuel.
Cost of lubrification per operating hour = TK * (SP / 100)
TK...Cost of fuel per operating hour
SP...Lubrification percentage
   

Suggested price Suggested price
Suggested prices are equivalent to depreciation sums. Put in this price including expenses for parts like tires, cables or tools. For example for chainsaws prices are to be put in inclusive expenses for swivel blade and sawing chain.
For calculation the expenses for these parts are subtracted from the depreciation sum and calculated seperately. Reason for this are differences in the maximum number of hours of economic use.
In case of sled winches suggested price is given without cables, as cable equipment can vary very much in quantity and material. In this case you should put in your own price without cables.   ¤ 
Max. operating hours of economic use Max. operating hours of economic use
Total number of operating hours for a device at maximum annual workload and economic use.
  hrs. 
Max. years of economic use Maximum economic useful life
Useful life in years, in which the machine can be operated with economic success.
The Maximum economic useful life is a hypothetical value which is only valid for an annual workload of null hours.
Using an elliptic equation a reduced useful life ist derivated and used for further calculation.
  years 
Maximum annual workload Maximum annual workload
Highest possible number of operating hours which one can use a machinery/equipment, independent from the situation of the own enterprise.
If this value is higher than the maximum operating hours of economic use
then the maximum annual workload is set to the value for maximum operating hours of economic use, because our calculating routine cannot deal with a useful life lower than one year.
  hrs. 
Interest rate Interest rate
Annual interest for the investition expressed in percent.   % 
Cost of repair as a prize coefficient Cost of repair as a price coefficient
The calculation is done using a coefficient deduced from empiric values.
This coefficient is the relation between cost of repair and the price of the new equipment/machinery for maximum operating hours of economic use.
For a lower annual workload the cost of repair is reduced by a factor
consisting of reduced hours of use divided by maximum hours of use.
This takes the fact of a lower total amount of operating hours and therefore lower repair costs into consideration.
  
Required garage space Required garage space
Required space of machine/equipment in cubic meters.
If null, this number will be calculated if any values for length, width and height are found in the database.
  m³ 
Cost of building per cubic meter/yr. Cost of Building
Cost of Building per cubic meter and year in ¤.   ¤/m³ 
Fuel consumption   l/h 
Fuel price   ¤/l incl. VAT 
Cost of lubrification as pct. of fuel price Percentage of lubrification
Percentage of fuel cost per operating hour used for calculation of lubrification cost per operating hour.   % 
Skyline cable   
Suggested price   ¤ 
Max. operating hours of economic use   hrs. 
Max. years of economic use   years 
Tow rope   
Suggested price   ¤ 
Max. operating hours of economic use   hrs. 
Max. years of economic use   years 
Anchoring cables   
Suggested price   ¤ 
Max. operating hours of economic use   hrs. 
Max. years of economic use   years 
Auxiliary cables   
Suggested price   ¤ 
Max. operating hours of economic use   hrs. 
Max. years of economic use   years 
Rewind cable   
Suggested price   ¤ 
Max. operating hours of economic use   hrs. 
Max. years of economic use   years 
Traverse equipment   ¤ 
Suggested price   ¤ 